Effect Of Synergic Controlled Pulsed And Manual Gas Metal Arc Welding Processes On Mechanical And Metallurgical Properties Of Aisi 430 Ferritic Stainless Steel

Abstract

The gas metal arc is widely used in manufacturing industries because of the high metal deposition rate and ease of automation with better weld quality at permissible cost than other welding processes in joining similar and dissimilar metals. AISI 430 steel is normally difficult to weld by melting methods, due to the associated problems such as grain growth. For this purpose, AISI 430 ferritic stainless steel couples of 10 mm thick were welded by the synergic controlled pulsed (GMAW-P) and manual gas metal arc (GMAW) welding techniques. The interface appearances of the welded specimens were examined by scanning electron microscopy (SEM). Structural changes in the weld zone were analysed by energy dispersive spectrometry (EDS) and X-ray diffraction (X-RD). Microhardness, notch charpy and tensile tests were conducted to determine the mechanical properties of specimens. Accordingly, the best result was obtained from the GMAW-P technique.