A Study on Microstructure and Fabrication of Porous Mg-10Al Alloy

Kaya, Mehmet

DSpace Home
→
Araştırma Çıktıları | TR-Dizin | WoS | Scopus | PubMed |
→
WoS İndeksli Yayınlar Koleksiyonu
→
2012
→
View Item

dc.contributor.author	Kaya, Mehmet
dc.date.accessioned	2022-04-22T11:06:37Z
dc.date.available	2022-04-22T11:06:37Z
dc.date.issued	2012
dc.identifier.issn	1042-6914
dc.identifier.uri	http://dspace.adiyaman.edu.tr:8080/xmlui/handle/20.500.12414/2885
dc.description.abstract	In this study, porous Mg-10Al alloy specimens were fabricated by conventional powder metallurgy sintering method for use as hydrogen storage fuel cells. The porosity, pore morphologies, phases in microstructure, and hardness of specimens, which were previously pressed at different cold compaction pressures and then sintered at 465 degrees C, were investigated. The Mg phase desired for hydrogen storage was the predominant phase for all of the specimens. In addition, several second phases, such as the Mg3.1Al0.9 and the Mg17Al12 phases, formed in the microstructures. As a result of increasing cold compaction pressure, the porosity and Mg phase decreased, while the hardness and Mg17Al12 phase increased.	tr
dc.language.iso	en	tr
dc.publisher	Taylor & Francis Inc	tr
dc.subject	Alloys	tr
dc.subject	Aluminum	tr
dc.subject	Magnesium	tr
dc.subject	MgAl	tr
dc.subject	Microhardness	tr
dc.subject	Microstructure	tr
dc.subject	Porosity	tr
dc.subject	Powder	tr
dc.title	A Study on Microstructure and Fabrication of Porous Mg-10Al Alloy	tr
dc.type	Article	tr
dc.contributor.authorID	0000-0001-9710-2254	tr
dc.contributor.department	Adiyaman Univ, Vocat Sch,	tr
dc.identifier.endpage	608	tr
dc.identifier.issue	6	tr
dc.identifier.startpage	605	tr
dc.identifier.volume	27	tr
dc.source.title	Materials And Manufacturing Processes	tr